Industrial 3MT Geared Head Drilling Machine GHD-22 Ø31.5mm Drilling Capacity

Description

Have you had enough of drilling machines that can slip via their pulley & drive belt system? Then if this is happening to your drill in the workshop, I urge you to consider this GHD-22 Industrial 3 morse taper geared head drilling machine to eliminate that drive slippage.

This drill has all the common features that is required for e.g., large cast drill table with T-slots and rotates 360º, drilling speeds from 105 to 2900rpm, drill depth stop for accurate repeatability and a 16mm drill chuck with adaptor. Another notable feature to mention is that just like the rack & pinion drill table height adjustment, the drill head can also be adjusted up or down to suit the height for each operator.

Features

• Ideal for industrial or workshop use
• Geared head drilling machine with 3 morse taper spindle
• 8 drilling speeds from 105 - 2900 rpm
• High/low with forward & reverse switch
• Helical cut gears for quiet & smooth operation
• Interlocked spindle safety guard
• Rack and pinion wind-up drill head
• Rack & pinion table height adjustment with locking lever
• Thick walled column ensuring greater rigidity
• Drill ejector lever
• Safety emergency stop/reset switch
• Table rotates 360º
• Drilling depth stop setting with scale
• T slotted work table

Includes

• 16mm keyed drill chuck and arbor
• Chuck key to suit
• Drill drift tool to remove drill chuck or taper shank drills
• Interlocked spindle safety guard